5 Tips on Replacing a Fluorescent Lamp Holder Socket

If you have never worked on fluorescent lighting, it can be a challenging experience. However, many jobs are not difficult if you know what you are doing and have the right parts. Here are some tips for replacing a fluorescent lamp socket holder with the least amount of difficulties.

1. Know the Basics of Electricity

If you do not know the difference between a black, white, and green wire, it’s best to leave this job to someone who understands electricity. In addition, fluorescent lights operate on a different principle than standard incandescent lights and you need to have a working knowledge of fluorescent lighting. For example, new types of fluorescent lights typically use a ballast, bulbs, and lamp holder socket parts. However, many older types also require a starter.

2. Is it the Lamp Holder Socket?

Does the bulb flicker or make a humming noise? Is there a gray or black discoloration on the casing of the bulb? If this is the case, you may only need to change the bulb, and replacing the socket may not be necessary. In some cases, you might be able to clean the socket, as the contacts may have become dirty. To clean the socket, use some rubbing alcohol on the contacts.

3. Remove the Fixture

Have you experienced problems working from a ladder? It’s not easy when you are up in the air, and this is why it’s best to remove the light unit before you replace the lamp holder socket. It makes the job much easier and is a good way to avoid possible injury.

4. Keep Safety in Mind at All Times

Always remember to shut of the power before you change bulbs or do any work on your fluorescent lighting. Something as simple as flipping off a breaker can help you avoid a lot of trouble and perhaps a trip to the emergency room.

5. Make Sure to Order the Right Parts

When possible, replace parts which are identical to the old ones. However, some older parts may be hard to identify. This is very important when it comes to fluorescent ballasts. For example, residential ballasts should have a white or yellow label. Do not confuse them with parts designed for three phase industrial use, as they usually have pink or red labels. The best way to ensure you are getting the right lamp holder socket and other parts, is to choose a trusted provider. They have experienced customer service reps to help you get the perfect part for your needs.

When you need the right lamp holder socket parts, come to H. H. Fluorescent Parts. We have been in business since 1952 and offer a wide range of lamp holder selections. To see all we have to offer, visit us on the Web today at Hhfluorescentparts.net.

Be the first to like.

Leave a Reply

Your email address will not be published. Required fields are marked *

four × five =